宝马M2 M3 M4 BMW G87 G80 G82 G8X Mpower定制排气中段
- 2023.11.24
-
产品说明：
仅提供定制的排气中段：
一、前端提供两只200钼高流量载体，截体外形和原厂排气一样为较高成本的扁体（非圆形），扁体结构不会导致排气与车身的间隙减少，给激烈驾驶时排气的位移留好空间。
高流量载体与原厂排气拥有同样的排气面积，但具有更小的钼数，在确保高流量排气效率的同时，防止排气在引擎高转时产品的破音、脆音以及敲打排气阀门而产生异响。
二、后端提供与原厂排气同样尺寸的消音鼓，不是使用通用的消音鼓、也不是采用较低成本的圆鼓，这样的设计可以减少排气低频输出，减少长时间驾驶汽车产生耳鸣的概率。
三、全段管径采用70mm的口径，可以减少排气低频声浪输出的概率且能应对刷写程式对动力提升的需求。
四、前端高流量载体上可以提供个性化的文字雕刻（如：Bimmer.HUZIGE）。
五、在店安装可以选择定制V-BAND法兰接口。
六、全段提供拉丝表面，不提供镜面管体，以提高与原厂排气尾段的协调度。
七、中段升级带来的马力提升约10HP。
Only customized exhaust mid section available:
1、 The front end provides two 200 molybdenum high flow carriers, and the cross-sectional shape is a high cost flat body (non circular) similar to the original factory exhaust. The flat structure will not reduce the gap between the exhaust and the body, leaving good space for displacement of the exhaust during intense driving.
The high flow carrier has the same exhaust area as the original factory exhaust, but has a smaller molybdenum number. While ensuring high flow exhaust efficiency, it prevents the exhaust from producing cracking, crisp sounds, and abnormal sounds when knocking on the exhaust valve during high engine rotation.
2、 The rear end provides a silencer drum of the same size as the original factory exhaust, instead of using a universal silencer drum or a low-cost round drum. This design can reduce the low-frequency output of the exhaust and reduce the probability of tinnitus when driving the car for a long time.
3、 The entire pipe diameter adopts a 70mm diameter, which can reduce the probability of low-frequency sound wave output from the exhaust and meet the power improvement requirements of the brush writing program.
4、 Personalized text engraving (such as Bimmer.HUZIGE) can be provided on high traffic front-end carriers.
5、 Customized V-BAND flange interfaces can be selected for installation in the store.
6、 Provide a brushed surface for the entire section, not a mirrored tube body, to improve coordination with the original exhaust tail section.
7、 The mid-term upgrade brings about a horsepower increase of about 10HP.
抖音、小红书视频分享
Tiktok, Xiaohongshu video sharing
---------------------------------------------------------------------------------------------------------------------------------------------
1.配件编号：G87029
2.产地：中国
3.材质：不锈钢
4.适用车型：BMW G87M2
5.附件：无
6.声明：原车中段需要切割，标配双抱箍，可选装BMW原厂抱箍或现场定制V-BAND接口
定制中段产品实物
（图中含有现场定制的V-BAND接口，发货产品不带此接口）
---------------------------------------------------------------------------------------------------------------------------------------------
现场定制的V-BAND接口，发货产品不带此接口
---------------------------------------------------------------------------------------------------------------------------------------------
前端200钼双三元，表面提供个性化文字雕刻
---------------------------------------------------------------------------------------------------------------------------------------------
后端消音鼓
---------------------------------------------------------------------------------------------------------------------------------------------
实车改装（BMW G87）
---------------------------------------------------------------------------------------------------------------------------------------------
